Conference: October 15-17, 2019
Exhibition: October 16-17, 2019

London, UK

EASA Services Pavilion

Following the success of the first EASA Part 21 Pavilion in 2018, MRO Europe will host the EASA Services Pavilion, a designated area at the front of the exhibition hall where MROs, airlines and lessors requiring Part 21 (Design and Manufacturing), Part 147 (Training) and Part M (CAMO) services can meet companies that hold these approvals.

Confirmed exhibitors on the pavilion include:


Booth 905 M

ABC INTERNATIONAL is an EASA approved Part21J Design Organization (EASA.21J.529) with the privilege to approve minor cabin changes and to apply for Supplemental Type Certificates (STC). We are able to perform an accurate work-scope analysis and assessment, classify cabin modifications as major or minor and approve the modifications classified minor directly, ensuring shortest possible aircraft downtime. We take care of your cabin customization and upgrade projects by creating real value.Using latest technologies along with in-house design and manufacturing capabilities, we are able to develop cost efficient, fully customized and EASA certified aircraft cabin interiors parts with the fastest possible turnaround also for low volume project.


Booth 905 K

21jAeroDesign Limited holds an EASA DOA with scope to design and approve parts, modifications and repairs. The company is headed by Adam Duke, a highly-regarded aviation professional with over 30 years’ experience in design, maintenance, CAMO and airlines. Using our extensive industry knowledge and expertise, we are committed to reducing cost and waste for our Customers while increasing efficiency for their operation.

Aeroworks Composites

Booth 905 F

Aeroworks Composites, specializes in aircraft interior repair, modifications, refurbishment and testing services. Our test lab specializes in Fire Property (FST and Heat Release) and Mechanical Testing, in accordance with aerospace requirements and/or OEM specific test procedures. With over 30 years of aircraft interior manufacturing and testing experience, our solution orientated and certified staff will collaborate with your design and engineering teams to optimize your design. Our EASA part 21G and 145 services include repairs, mods and refurbishments to composites, plastic and metal components for Galleys, Lavatories, Seating, Side Walls and other cabin sections. Please visit us at the EASA pavilion!

CAE Parc Aviation

Booth 905 P

CAE Parc Aviation is an EASA approved CAMO and Design organisation. Our experienced design team have the capability to produce a full suite of multi-disciplined aircraft modifications (interiors, avionics, structures) from Minor to Major (STC). Modifications can be provided as EASA, FAA and UAE approved engineering packages on all commercial aircraft platforms. Our CAMO department holds EASA, Bermuda, Guernsey, Cayman Islands & Isle of Man approvals.  Working with leasing companies, airlines and aviation authorities, we seamlessly manage airworthiness requirements and aircraft transitions to keep our clients’ aircraft in compliance. Additionally, we hold EASA Part 145 and FAA approvals to perform engine borescope inspections.

Dansoft Aviation Services Ltd

Booth 905 E

DansoftAS is a CAMO Provider which Holds both EASA and Guernsey approvals for a wide range of both Boeing and Airbus Aircraft for both Management  (Subpart G) and ARC (Subpart I).  Set up in 2008 we have provided both CAMO Services for live aircraft and aircraft transitioning between Operators/Owners.  Also providing End of lease support to meet leasing company / owners requirements, including Import/Export C of A and ARC Recommendations between EASA States as well as Various SHINE Countries such as USA, Australia and India.Coming in 2020 DansoftTS will be a new EASA Part 147 Type Training School.  Talk to us more about this exciting endevor.


Booth 905 G

The EC Group is a global player in the field of high quality and sophisticated composite materials. We serve our customers from all over the world from three production locations. We deliver tailored solutions just in time and in the highest quality: Ready-to-install parts and structures, formed and / or milled composites parts, panels and laminates. With our Design Organization qualification (EASA Part 21J) as well as qualification according to EASA Part 21G and Part 145 we integrate the complete supply chain and can handle everything from design and engineering, production of parts, distribution, support and service. With our Design Organization qualification according to EASA Part 21 subpart J (since May 2019) as well as qualification according to EASA Part 21 G (since 2009) and Part 145 we can be your Design Organization, Production Organization as well as your Repair Organization. Additionally we can offer Training by Experts regarding EASA part21J. With our flexible and motivated team of specialists, EURO-COMPOSITES¯ provides various cabin interior support as modifications.

FTI Engineering Network GmbH

Booth 905 T

FTI Engineering Network GmbH is a German company founded in 2001. We develop customized airborne video systems for passenger and freighter aircraft. We provide you a full solution from design to the certification. We design modifications related to structure, avionics, electrics, interior and software. Learn more at stand 1080C! Our approvals: DOA: EASA.21J and POA: DE.21G.

Integra Aerospace

Booth 905 I

At Integra Aerospace our vision is to create training that contributes to a safer tomorrow. Our mission is to become aviation's leading blended learning specialists through the design, development, and delivery of training that develops the competence and safety of aviation professionals.Blended learning is where we combine the best of both online and classroom training methodologies and create training courses that are different, bespoke to each organisation and most importantly are effective and memorable. We work with aviation organisations that are forward thinking and have a desire to provide training, compliance or competence, that is more efficient, tailored to your organisation and empowers individuals to make a difference. 

KNSI Aviation Engineering Ltd

Booth 905 H

Based in the Diamond Hangar at Stansted Airport, UK, KNSI has EASA DOA, POA and 145 Component approval.   Our DOA provides design, integration, certification and AOG repair support for all types of aircrafts and rotor-crafts from Minor to Major and STC Modifications and Repairs. The Part-21.G POA manufactures OEM replacement parts, custom designed products, wiring harnesses and kits with EASA Form 1 release. And the EASA 145 Component workshop specialises in the overhaul, repair and servicing of interior parts. Our three approvals and extensive experience in Avionics, Interiors & Structural changes allow us to provide end to end solutions to any aircraft undergoing modifications or repairs, whether its in the hangar, on the line or transitioning between operators.

Marilake Aerosystems

Booth 905 A

Based near to Bournemouth Airport on the south coast of the UK, Marilake Aerosystems is an independent, privately owned avionics and instrument repair shop. The company was formed in 1973 and is EASA, FAA and TCCA Approved.  Specialising in a wide range of cockpit instrumentation, gyroscopic indicators, internal and external lighting, probes, sensors and transmitters, Marilake prides itself in offering very fast turn times and highly competitive pricing.  Platform coverage ranges from small, privately owned light aircraft through to the latest generation of narrow and wide bodied commercial airliners.  The company is trusted by Global Flag Carriers, Low Cost Airlines, Military Organisations, Air Ambulance Operators, Maintenance Organisations and recreational aviators alike. 

Medavia Technics

Booth 905 J

Medavia Technics, comprising of Part 145 Maintenance and Part 21J Design, together with our Production Organisation Approval Holders and partners, work in synergy to provide a wide range of services that cover every need of the client. Using experience, technology and innovation to create perfect solutions, Medavia Technics Part 21J Design Organisation can carry out changes to type designs for both large (CS-25) and small (CS-23) aircraft ranging from Avionics Systems and interior changes to performance and handling qualities. Our scope of approval encompasses Avionics, Cabin, Electrical Systems, Flight and Structures. We support our customers in every way whist following the latest airworthiness requirements and certification specifications.

Nubis Aviation Training

Booth 905 R

In partnership with ‘The Open University’ and the ‘Royal Society of Edinburgh’, Nubis Aviation Ltd has advanced an innovative online based ‘Continuous Learning’ platform for learning and Support of all aviation personnel.  Our ‘Continuous Learning’ environment is adaptable to individual company needs; empowers user engagement with training and learning; increases end-user information retention and saves on departmental overheads by reducing manpower and work planning deficits.  Dissemination of information is not enough in our industry with the current growth.  We at Nubis aim to bridge the gap between regulatory standards and complete understanding of disseminated information by continuously adapting procedural, regulatory and in-house training.

Oliver Wyman CAVOK

Booth 905 B-C

CAVOK has an extensive EASA Part M, Subpart G approval with the Subpart I, Airworthiness Review Certificate (ARC) privileges for numerous aircraft types. We provide the full range of CAMO services and support for private aircraft owners, commercial operators and leasing companies. We help operators strengthen safety, engineering and reliability, and minimize deficiencies before they become an expensive problem. We provide project-based assistance and long term in-house support guiding maintenance operations from initial applications or to reach the goals of existing operations.


Pt21 Solutions Ltd 

Booth 905 N

Pt21 Solutions Ltd is a EASA Part 21J Design Organisation (EASA 21J.443) based near Yeovil, Somerset in the UK. We specialise in the Design and Certification of aircraft Repairs and Modifications across all types of large and small fixed wing (CS23/25) and rotorcraft (CS27/29), enabling us to modify structures, cabin interiors and electrical items whether that is a simple refresh or a new layout or structural repair. Building on our team’s extensive experience in commercial, business and VVIP Cabin Interiors, Structures and electrical systems, Pt21 Solutions Ltd can provide cost effective and innovative solutions for your business needs. Pt21 Solutions Ltd also provides training in EASA Part 21 and Certification Standards and practical courses in the use of the SRM through our partner organisations Part 21 Services and SAS Sofema.

The SA Group

Booth 905 Q

As EASA Part 21J approved design organization, Scandinavian Avionics Design ApS (SAD) - member of The SA Group, offers development of Supplemental Type Certificates (STC) and minor changes to existing aircraft type certificates, covering any avionics or electrical modification of any aircraft or helicopter application. In addition to avionics system upgrades, we offer certification of structural upgrades and interior modifications, performed by SA and/or partners. New STC’s are being developed every month, and the list can be found on our website.Scandinavian Avionics Training Department, offers any training course under EASA Part 147, -145 and -21 customized to meet the specific customer needs. The training courses include classroom training and multiple choice examinations conducted by our EASA Part 147 approved instructors.

Do you offer Part 21 (Design and Manufacturing), Part 147 (Training) and Part M (CAMO) services?

Get in touch with Michelle Wiles to take advantage of this fantastic value for money opportunity to launch your products into an active market looking for your solutions:

Michelle Wiles, Exhibition Sales
Phone: +44 7916 291674